Why Do My AirPods Die So Fast? Try These 15 Fixes

Why Do My AirPods Die So Fast

According to Apple, a single full charge of the first-generation AirPods can provide up to two hours of speaking time or five hours of listening time. The second-generation AirPods feature a three-hour conversation time, much longer than the first model.

The battery life is around four and a half hours of listening time or three and a half hours of talking time.

If you’re having trouble with your AirPods and their battery life, there are a few reasons for this. If only one AirPods is dying faster than the other, then you could have other problems on your hands.

Why Are My Airpods Dying So Fast?

It takes an hour for your AirPods case to be fully charged. Check the battery’s status light to see whether it needs to be recharged. Alternatively, when it is entirely charged, the status light illuminates for 8 seconds while the device is charging. A green light indicates that the battery is fully charged.

Amber means that your case has one full charge remaining. If you have an iPhone, you can also use it to check the battery level in your AirPods case. To check the battery level, follow these steps:

1. Remove the AirPods case’s cover and place them inside.

2. Keep it close to your Apple device.

3. Wait a few seconds before continuing.

4. The battery charge level will be shown.

If you charge your AirPods, but you still encounter the battery draining, it could be caused by the following:

1. The Volume Is Too High

A pair of AirPods playing music at a lower volume will survive somewhat longer than blasting it at the highest volume possible. Additionally, it is beneficial for your hearing.

Keep in mind that AirPods consume more power for things like Bluetooth than for the drivers, so we estimate the savings to be minimal.

The more you turn up the volume on your AirPods, the more power they drain. A transistor can be found in virtually any device that amplifies audio.

Its function is to increase the strength of tiny sound waves. It takes energy for the transistor to function correctly. It receives it from the batteries in the AirPods.

The transistor is forced to work harder when the volume increases. Pushing it will increase the volume of the sound waves from your favorite podcast. The speakers of your AirPods are receiving more power.

The cones on these speakers oscillate back and forth in their respective positions. It is a significant increase in distance from the norm. It harms more than simply your battery life. It might also have an impact on your hearing.

2. The Charging Case Doesn’t Have Enough Charge

One of the most intriguing characteristics of AirPods that contributes to its widespread popularity is the ability to charge everything wirelessly. To charge your AirPods, you don’t need to use any cables.

If your AirPods battery is depleting quickly, check to see if the charging case has enough power to charge both AirPods or not. If your AirPods case is not charging, replace the charging case (view on Amazon).

If the AirPods charging case does not have enough energy, it will not be able to charge your AirPods, resulting in their rapidly losing battery power.

3. AirPods Batteries Are Getting Old

These batteries are made of lithium-ion technology. They are small and can be recharged on the go. Cons? They deteriorate over time. Batteries naturally degrade after several months of continual charge and use.

Dendrites are growing as a result of this. Dendrites are microscopic formations that develop in the negative conductor of a battery. As a result, the battery does not perform as well as it used to.

They have the potential to cause short circuits and fires in more severe conditions. Dendrites can also hurt the capacity of your battery.

They interfere with the electrolyte in your battery, causing the active lithium to get destroyed. The active lithium is responsible for the ability to retain its charge.

When your AirPods battery is damaged, it can also cause some connectivity. You may notice that when you’re on a call, your AirPods disconnect. This is one problem that you’ll find when your battery isn’t as good as it once was.

4. Airpods Are Not Placed in the Charging Case

In most cases, assuming the case has enough charge remaining, the AirPods begin charging as soon as they are placed in the case, although this isn’t always true.

Because the rate of power acquisition by the AirPods per unit of time during the charge is significantly greater than the rate of power loss, the illusion is created that the AirPods are not losing battery when they are in the case. As a result, the battery in the AirPods case continues to deplete itself.

When you are not actively wearing the AirPods to listen to music, they enter a low power mode, similar to that of other Bluetooth devices, to conserve energy (battery power).

On the other hand, the low power option drains energy to preserve the Bluetooth connection with your device. Keeping the link allows you to play and pause music without the need to click any physical buttons on the device itself.

Users will appreciate how much more convenient this is, and the whole user experience will be enhanced. As a result, the Airpods do not have any physical buttons.

Several folks have gotten into the habit of not putting their AirPods back in their case when they are not using them. In addition, when AirPods are not in their case, they waste the battery since the AirPods go into a low power mode instead of shutting off.

The proximity sensor continues to function as usual. It is required to retain the Bluetooth connection and restart playback as necessary without the need to click any physical buttons on the device itself.

5. You’re Using Automatic Ear Detection

Have you ever noticed how your AirPods flawlessly halt music or movie when you remove one earbud from your ear and then resume playing when you put the earbud back in your ear?

Automatic Ear Detection is beneficial; however, it depletes the battery life of your AirPods. Automatic Ear Detection is a function that can be turned off if it is not a must-have feature for you.

6. You’re Using Active Noise Cancellation

Enabling ANC on your AirPods will result in greater use of battery power. ANC can be turned off to preserve battery life if you don’t mind a lot of background noise when traveling for a lengthy period.

In a noisy area, your active noise-canceling AirPods will typically consume 20-30 percent more power than in a quiet one. Active noise-canceling AirPods are programmed to reduce background noise, consuming more battery power.

7. You’re Using Tap Commands Function With The Sensors

AirPods are equipped with various sensors that make listening to music more convenient than ever. Tap commands, active noise cancellation, and Automatic Ear Detection are all made possible by these sensors, among other things.

When you remove AirPods from your ears, Ear Detection sensors activate, causing the audio to cease. Using tap instructions, you can stop, play, and control your music in many ways.

AirPods Pro is equipped with Active Noise Cancellation, effectively eliminating all external and distracting sounds once placed in your ears. These capabilities are intriguing, but they can quickly deplete the battery life of your AirPods.

8. Your AirPods Are Fake

When it comes to recognizing a fake pair of AirPods, the devil is in the details. It should come as no surprise, given the phenomenal popularity of Apple’s earphones in recent years.

In addition to dodgy third-party websites, they’ve become available on resale platforms that connect people to people. The interior of the cover and the inside of each earbud is printed with a darker ink than Apple’s.

The bottom cap below the charging connections isn’t as smooth as it should be on the fakes, and the seam is not as smooth as it should. Each of the ear tips differs somewhat in silicone stiffness from the one used by Apple. If you are using fake AirPods, the battery life will be short, and you will need to charge them constantly.

9. Someone’s Using Your AirPods Without You Knowing

So, is it possible for someone to connect to my AirPods without my knowledge? It is feasible to use another person’s AirPods, and this has been done in the past. The challenge you’ll have to deal with is the pairing process.

When AirPods are linked, they are referred to as “X person’s AirPods,” which is how they are displayed in your device list. If you find your battery draining quickly, someone might be using your AirPods without you knowing.

10. Music Is Playing While Your AirPods Aren’t In Your Ear

The sensors in your AirPods allow them only to play music while they are in your ears. It is known as automatic ear detection. The music will immediately halt if you remove one or both headphones.

These sensors are susceptible to malfunctioning from time to time, or there might be a short fault. Because you are used to AirPods automatically switching off, you may not notice when they continue playing music, leading to your battery draining.

How to Stop AirPods From Dying Fast?

You need to learn how to take care of your AirPods. They are considerably safer in the case than in your pocket or backpack, where they can be scratched or otherwise damaged by sharp things.

Second, if they should go into the water, the case will give further protection. And, finally, you’ll constantly be aware of their whereabouts. Isn’t it true that losing a single bud is much simpler than losing the case?

There’s another trick. If the battery is deficient, allow them to charge for at least 30 minutes without interrupting their work or other activities. Refrain from opening and closing the case more than once during the initial 30-minute interval.

That time is critical, and you should allow the batteries to charge fully. To stop your AirPods from dying fast:

1. Reset Your AirPods

The simplest and most obvious option is to reset your AirPods. If you are experiencing any problems with your AirPods, choose this option. To reset your AirPods, follow the procedures outlined below:

1. Place your AirPods in their charging case and snap the cover shut.

2. Remove the lid and wait at least 30 seconds before opening it.

3. Open the Settings app on your iPhone.

4. Switch on Bluetooth.

5. Locate your AirPods and press the I button on them.

6. Select Forget This Device and press the button again to finalize the action.

7. When the case lid is opened, press and hold the button on the rear of the charging case for a few seconds until you see the LED light blinking.

8. A pop-up tab will appear; click on the Connect button.

9. Follow the on-screen prompts to allow the AirPods to link with your iPhone.

2. Replace Your AirPods

If nothing seems to work, your AirPods might need to be repaired. If this is the case, you can take the batteries to an Apple Authorized Service Provider for repair or replacement.

In most cases, this service does not repair the physical batteries but instead provides new AirPods. It is not always free, but it is far less expensive than purchasing a brand new pair of AirPods.

It’s a fantastic idea to pay for a battery replacement if you enjoy your present AirPods and don’t want to spend a lot of money buying a new pair. It’s also more environmentally beneficial since it ensures that your old AirPods will be recycled to the greatest extent.

3, Replace Your AirPods

Since replacing your AirPods is the fix you probably didn’t want to hear if you’ve found that your AirPods are damaged and the problem is deeper since you’re unable to have a long battery life with them, you’ll need to get it replaced.

You can replace your AirPods (view on Amazon) with the new AirPods Pro since it’s the model I’d recommend the most. It’s trustworthy and doesn’t have issues like the first generation of AirPods. Upgrading your AirPods will lower the number of issues you have with it and you’ll no longer experience the battery draining problems.

4. Reset AirPods

Alternatively, you can use the AirPods charging case to reset your AirPods. To accomplish this, follow the procedures outlined below:

  1. Open the charging case by flipping it open.
  2. Hold down the circular pairing button on the back of the charging case for a few seconds.
  3. It will take 10 seconds until the light changes to white.
  4. The AirPods will be reset, and you will be able to pair them once more.

5. Put AirPods In The Charging Case

Don’t forget to put those AirPods back where they belong when you’ve finished using them. Why is it vital to keep your AirPods in their case while not using them? Physical harm to your AirPods is prevented by using the case.

It also helps to keep them from becoming misplaced or misdirected. Aside from that, the case charges your AirPods on its own automatically. Get them ready for your next listening session.

A 5-minute charge might be insufficient. However, it already provides you with an additional 60 minutes of listening or chatting time. Make sure to check the battery level of your AirPods.

6. Fully Drain AirPods Battery

Pressing down the white button on the back of the AirPods case for more than 10 seconds will completely reset the case. Repair the AirPods with your iPhone once they have been disconnected.

Both AirPods and the case will be completely depleted to zero percent capacity through typical use. Incorporate the drained AirPods into the dead case and charge them both to 100 percent.

7. Clean AirPods and Charging Ports

You might notice that your AirPods don’t charge entirely or rapidly die due to the earwax and other types of dirt accumulated on your AirPod and within the charging port.

Begin by carefully washing the bottom metal ring of your AirPods with a Q-tip to remove any dust or debris. After that, open your charging case and thoroughly clean it.

Be careful as you tend the charging port. If necessary, you can add a few drops of isopropyl alcohol to the end of the Q-tip to provide a thorough clean. Don’t be concerned; Apple has given its approval!

8. Switch off Automatic Ear Detection

When you take your AirPods out of your ear to pause or stop the music, Automatic Ear Detection is a beneficial function that makes your AirPods smart enough to recognize when you do so.

This functionality is dependent on batteries to work, which explains why your AirPods are dying so quickly. To turn off Automatic Ear Detection, just follow the instructions outlined below:

1. To begin, open the Settings application.

2. Select Bluetooth as the connection type.

3. Double-check that your AirPods are correctly connected to your iPhone.

4. Select AirPods from the drop-down menu by pressing the I button next to their name.

5. Toggle off Automatic Ear Detection with a single tap.

9. Turn Off Touch Commands

To get more information on your AirPods, click on the More Info button. You can pick which AirPod you’d want Siri to use by selecting either the left or right AirPod, skipping between songs, playing, or stopping audio content. By turning off touch commands, you will preserve the battery of your Airpods.

10. Turn Off Noise Cancellation

Active Noise Cancellation is only available on the AirPods Pro and AirPods Max models. Although it is a valuable tool, you might not need it all of the time. It is possible to save a few extra minutes of active time by turning this feature off. It is something you can do on your device. Alternatively, you can use your Apple Watch. To turn off noise canceling, follow these steps:

1. Navigate to the control center of your device.

2. Put your AirPods Max or AirPods Pro on your ears.

3. Hold down the volume slider on your smartphone for a few seconds.

4. Toggle on the Noise Cancellation feature by tapping the symbol in the lower-left corner.

5. Select Off from the drop-down menu.

11. Do Not Use the AirPods As a Pair

Utilizing only one AirPod at a time is another effective method of virtually doubling your listening time and battery life. It isn’t the best solution, but it could be worth it, depending on your circumstances.

For example, if you’re in a peaceful spot and need to participate in an online Zoom conference call. Using only one of the AirPods will provide you with enough battery life to continue on the phone for the duration of the conversation.

While this isn’t the ideal answer for the long run, it’s an excellent fallback option in a situation where you need to preserve battery life.

12. Decrease AirPods Volume

A feature in your iPhone’s iOS 13 and Apple Watch can alert you if you listen to music at a loud volume. It is referred to as the Health application, and it isn’t simply for the sake of the health of your AirPod batteries.

It is also beneficial to your ear health. Lowering the volume of your music can help you save some of your battery’s vital energy. It is recommended that your audio does not exceed 85 dB to avoid hearing damage.

13. Repair AirPods

If your AirPods or Charging case is inadvertently damaged, you can replace the damaged item for a charge if the damage occurred outside the warranty period. If you misplace your AirPods or your Charging Case, Apple will replace the item for a charge, which you can find out here. Repairing your AirPods could cost you as much as getting new ones.

14. Don’t Use Your AirPods As Much

If your AirPods battery drains a lot quicker, you need to monitor your AirPods use. It is recommended that you use your AirPods for not more than ninety minutes a day to preserve your battery and save your ears.

15. Upgrade Your AirPods

Upgrade to the third-generation AirPods if you already have the second-generation model. It might be worthwhile to upgrade if you are attracted by any new features or looking for a variety of overall improvements.

The AirPods Pro are pretty simple to set up and use once you have them. They’re also a lot more comfortable, and they come with a slew of fantastic extras.

How to Extend AirPod Battery Life Long Term

As an AirPods user, there are some things that you can do to try and prolong your battery life. These include:

1. Use Charging Cables Certified By Apple

This counterfeit item poses a safety risk to you and your Apple goods, according to Apple’s help page, which has a special section warning users to be cautious of them.

Buying a charging cable or wireless charging dock for your AirPods for half the price is a tempting proposition. Just ensure that the cable or dock is Apple-approved before investing your money.

An Apple-certified fast charger (view on Amazon) will allow you to charge your AirPods since they’re genuine, and will also do the job quickly. A third-party line (or power brick) purchased from Amazon or a mall store is likely to be low-quality, if not a counterfeit.

The saying is true: “You get what you pay for.” If you’re charging your AirPods with a low-quality charging cable, it’s conceivable that this is the source of your poor battery life and performance.

2. Don’t Let the Battery Get Lower Than 40%

Fill it up when it gets down to 50 percent, but disconnect it before it becomes 100 percent of its capacity. When it comes to keeping your battery charged, the golden rule is to keep it anywhere between 30 percent and 90 percent charged.

3. Store AirPods in a Controlled Environment

You should store your AirPods in a secure location, just like any other electronic device. It implies that you should avoid leaving them in direct sunlight or extremely hot or cold temperatures! By exposing your AirPods to severe temperatures, you will significantly reduce the battery life of your headphones.

The temperature range suitable for lithium-ion batteries is typically between 20 and 60 degrees Celsius. When your batteries are exposed to temperatures outside of this range, they will suffer from a deterioration in performance and permanent damage. Your best strategy is to always bring your AirPods inside and keep them charged in a drawer while you aren’t using them.

4. Don’t Use Your AirPods As Much

Limiting your AirPods use is the best thing you can do for the battery. Ensure that when you are not using the AirPods, there is no music playing.

5. Don’t Let Your AirPods Get Too Hot or Too Cold

In addition to being in a setting with temperatures above 95 degrees Fahrenheit or being exposed to direct sunlight for extended periods, AirPods can overheat more readily if there is a lot of debris and dust.

As a result, it is also beneficial to clean your AirPods regularly to avoid them from overheating. Furthermore, if your AirPods are prone to overheating and you have eliminated all of the possible causes listed above, they may be experiencing a hardware problem.

In this instance, take them to the Genius Bar at the Apple Store so they can be checked out.

AirPods do not perform well in high temperatures or perform well in low temperatures. You should use AirPods at temperatures ranging from 0o to 35o Celsius (32o to 95o Fahrenheit).

Because of the wide temperature range, customers choose how and where to use their AirPods while safeguarding the design and battery life of the AirPods. Using them in a chilly climate might cause their battery life to be temporarily reduced or even force them to shut off abruptly.

However, using them while it is too hot is much worse since overheating can cause the battery life to be permanently reduced or even shortened.

On the other hand, Apple developed AirPod devices to automatically safeguard its internal components from severe temperatures and self-regulate when the device’s average operating temperature exceeds the manufacturer’s specifications.

Because of this design feature, your AirPods can shut off abruptly if they get too hot to wear. Once they have cooled down, they will resume their regular operation.

6. Don’t Leave Your AirPods Case Plugged In Continuously

It is safer not to leave your AirPods plugged in continuously. It can affect your battery life and how long it takes until your AirPods are appropriately charged.

7. Don’t Open and Close Your AirPods Case Lid Repeatedly

In the same way that clicking a pen cap is a habit for many people, every AirPods user has undoubtedly been guilty of frequently opening and closing the case cover.

The problem is that every time you open and reopen the charging case, you simultaneously activate your AirPods’ Bluetooth and then abruptly turn it off. Sending endless instructions in this manner depletes the battery life of your AirPods.

It happens regardless of whether the AirPods are in their case. It would be best to put the case where your hand can’t reach it once you’ve adequately paired and linked your AirPods.

8. Don’t Get AirPods Wet (Use a Case)

If you’re used to getting your AirPods wet just because you know that they’re waterproof, then you’re risking damage, which could lead to them dying fast.

You might accidentally leave them in your jeans when doing the washing, take them on your workouts where you end up sweating a lot, or take them out with you on rainy days.

All of these activities could leave your AirPods damaged due to the water. Even though your AirPods are water-resistant, this doesn’t mean that they’re waterproof; getting them wet damages them each time.

To prevent situations where your AirPods are constantly getting drenched in water, you must make sure you use a waterproof case (view on Amazon). This will prevent your AirPods from getting damaged which in turn will stop them from dying so fast.

9. Keep Your AirPods In Their Case

If you’ve been using wired earphones for a long time, you might believe that removing your AirPods from your ear and placing them on the side until your subsequent usage is entirely safe.

One issue with this behavior is that you can lose your AirPods, which is a real possibility. Other problems include that while your AirPods are not in their case, the device’s battery life continues to degrade.

It is because they are still connected to the Bluetooth on your smartphone. Even if you switch off Bluetooth, your AirPods stay in an active, always-ready state, ready to connect to your phone as soon as you do so for convenience.

As a result, remember to put your AirPods back into their case when they aren’t used to protect their battery lifespan.

The Takeaway

After learning the causes for why your AirPods batteries are draining so quickly, it should be much simpler for you to avoid them draining too soon in the future.

If none of the following suggestions work for you and you’ve been using your AirPods for at least two years, you should consider purchasing a new pair. Sell your old AirPods and buy the new AirPods to replace them.

They have a long conversation time and “Hey Siri” capabilities and are quicker to pair than their predecessors. AirPods are equipped with lithium-ion batteries, which deteriorate over time. You won’t be able to halt this process, but you can make it go more slowly by taking good care of your AirPods. Don’t expose your AirPods to very high or low temperatures.

David Johnson is a freelance writer with 9 years of experience writing for Techzillo and other established tech outlets like iMore. His focus and key interests are Apple and accessibility as well as consumer technology in general. Read our Editorial Guidlines and Fact Checking process.


Please enter your comment!
Please enter your name here