Why Are My AirPods So Quiet? 14 Reasons & Fixes

0
Why Are My AirPods So Quiet

AirPods are amongst Apple’s most popular items. They’re simple to use and quite effective! However, there are occurrences when they have concerns that must get handled. One typical problem is that AirPods get silent or have a low loudness over time. Have you ever encountered this problem?

If you discover that your AirPods are too silent, you should first determine the source of the issue. It is not unusual for dirt and filth to cause your Apple AirPods to become noisier. The filth is usually caused by earwax. It is because in-ear headphones are a veritable magnet for earwax. By carefully looking, you may often notice earwax encrustation on the headphones. However, if you suddenly believe you can go ahead and clean recklessly, you should proceed with caution. Water is hazardous to the speaker’s delicate membrane, and the grilles of AirPods are also particularly vulnerable and may be destroyed rapidly. If they become faulty, the speakers behind them will get harmed in the long term. Here’s how to make the AirPods louder, and everything sounds better.

Why Are My AirPods so Quiet?

Your AirPods are so silent because earwax, filth, and sweat have accumulated and created a coating over the speakers within your headphones. Remove the dirt off your AirPods using a clean, dry toothbrush or Q-Tip, and they will immediately become louder.

1. Your AirPods Are Dusty or Have Earwax

Gunk. If it gets into your AirPods through your ears, a dusty environment, or someplace else, you’ll notice a change. It is the most common reason your AirPods aren’t giving out as much sound as they used to. When earwax accumulates within your AirPods, the loudness might drop dramatically. Even a slight coating of earwax in your AirPods may significantly impact sound quality.

Moisture may also cause accumulation if you exercise while wearing your AirPods or wear them in the rain. The salt in your sweat will linger in the AirPods, causing the sound quality to degrade.

Furthermore, AirPods that have been wet from rain or sweat may gather dust as they dry. It is particularly true with the AirPods Pro, whose rubber tips collect dust, sweat, and earwax like no other! Check inside the tips to see if any muck has accumulated if the sound quality and loudness on your AirPods Pro have suddenly diminished. Sift through it! It might get so caked on that it is nearly indistinguishable at first look.

The Fix:

Check and clean the speakers on your AirPods regularly. Whether you have AirPods Pro, you may need to remove the tips to see if the speakers are gunk-covered.

Cleaning dirt and muck from your AirPods is a straightforward process. However, since you’re working with delicate electronics, you must ensure that you clean them properly.

Gently remove dirt and grime off your AirPods using a clean, dry toothbrush or comparable tool. You can also clean out your AirPods with a Q-Tip, precisely as you would your ears.

Be careful not to use any soap or water since this can aggravate the obstruction and permanently damage the speakers.

2. Low Power Mode On In Your iPhone

If your iPhone is in Low Power Mode, the volume on your AirPods will be reduced automatically. You may require to disable Low Power Mode to make your AirPods louder.

If you believe this is a design mistake, you’re correct. Low Power Mode shouldn’t alter the loudness since your AirPods aren’t draining power from your iPhone.

Your AirPods have their battery, and turning up the volume has no effect on your phone’s battery — yet it does!

But, although there is no logical reason for this to happen, it does. When your iPhone is in Low Power Mode, the volume of any headphones you’re using will get reduced.

The Fix:

Check your iPhone settings to discover whether you’re in Low Power Mode if your AirPods have suddenly gone silent. If you are, turn it off, and the volume should return to normal! But don’t forget to power up as soon as possible!

  1. Launch the “Settings” app.
  2. Select “Battery” from the menu.
  3. Then, turn “Low Power Mode” OFF.

3. The Connected Device’s Volume Level is Low

The battery level on your AirPods is charged to more than 50%. If that’s the case, the volume on your linked device may be too low. There is no volume control on any AirPods model.

As a result, the connected device ultimately determines the audio level.

If you can hardly hear a sound, the volume on your iPhone or iPad may be too low. Yes, it’s a straightforward issue. However, many users ignore it. So, before you worry, check the volume level on your linked device.

The Fix:

There are three methods to increase the loudness of your AirPods.

  1. The first step is to increase the volume on your iPhone, iPad, or MAC PC. Your AirPods must be linked to your other device for this to operate. If you can hear the volume in the earphones increase, your AirPods have successfully connected to your other device.
  2. The second method is to go via your device’s settings.

Navigate to the settings menu on your smartphone. And then go to “Sounds & Vibrations” or something similar. Then, increase the volume to a level that you’re comfortable with.

  1. Third, ask Siri to boost the volume of your AirPods. You may also say, “Hey Siri, turn up the volume.” In addition, the volume level of your AirPods will be increased by 15%. To volume up your device to the desired level, say, “Hey Siri, up the volume level to 70%.”

Here’s how to enable Siri depending on the model of your AirPods:

  1. Double-tap either earbud on the first-generation AirPods.
  2. For AirPods 2nd generation and higher, utter the wake phrase, “Hey Siri…”
  3. Set one earbud to activate Siri and utter the wake work, “Hey Siri…” using AirPods Pro.

Please remember that the “Hey Siri” feature will only operate if you have enabled it in your device’s settings.

4. Volume Limit on Your iPhone

Most phones and in-ear/over-ear headphones contain a safety function that prevents excessive loudness from harming your ears. That function works reasonably well most of the time — you can have your music or streaming level turned up quite loud without damaging your hearing.

However, the volume restriction on your AirPods may be pretty restrictive at times.

It is especially true if the music or video you’re listening to or seeing isn’t adequately mixed or if you’re in a boisterous area.

The Fix:

Turn off your phone’s volume limiter. Follow these procedures if you’re using an iPhone running iOS 15:

  1. Launch the “Settings” app.
  2. Select “Sounds and Haptics.”
  3. Locate and press the “Headphone Safety” button.
  4. Then, using the “Reduce Loud Sounds” setting, you may disable your volume limitation.

5. AirPods Are Old

It might sound like a no-brainer, but your AirPods are so quiet because they are old. Like every other product, they have a certain lifespan, a period in which they function at their total capacity. After that, they might still work, but they could have specific issues.

The Fix:

Make yourself a present and buy some brand-new AirPods to listen to loud and clear music.

6. AirPods Need to Be Updated

“My device’s loudness and connectivity are both OK.” “However, why are my AirPods still silent?” It is pretty uncommon. However, the device to which your AirPods are linked may have out-of-date software.

Outdated firmware does more than only prevent your device from receiving the most recent upgrades. However, it also causes your gadget to malfunction due to incompatible software upgrades.

When this occurs, your AirPods can:

  1. Play the audio at a low volume.
  2. Completely disconnect.
  3. Make shaky audio music.

When the firmware is outdated, the 5G feature may not work, which is in charge of presenting great-sounding, high-quality music via your AirPods.

The Fix:

Update the software on your linked device to remedy this problem.

Here’s how you can go about it:

  1. Navigate to the device’s settings.
  2. Choose “General.”
  3. “Software Update” will be displayed.
  4. And, if it appears, hit “Update Now.”

If the “Update Now” option does not appear, try restarting your device. Restarting devices aids in the removal of software flaws and the correction of minor errors.

You may accomplish this by pushing and holding your device’s power button. Then, from the choices, choose “Restart.” It will automatically switch your device off and on once.

Connect your AirPods after that. And observe whether it makes any difference.

Please keep in mind that a restart is not the same as a factory reset. So, don’t be concerned; doing so will not result in the deletion of any vital data. This procedure merely refreshes your device’s operating system. In addition, it deletes temporary memory data (RAM).

7. iPhone Software Old

If you didn’t upgrade your iOS device or AirPods when fresh updates got released, they’re acting up might be related to software difficulties. If you can upgrade them both to a later version of iOS, please do so!

To see whether any updates are available for any of these devices, go to:

Settings > General > Software Update on the iPhone

8. Mac Software Old

If you did not update your iOS device or AirPods when new updates appeared, the problem might be software issues. Please update them both to a more recent version of iOS if possible!

Go to: to check if any updates are available for these devices.

On the iPhone, go to Settings > General > Software Update.

9. Low Battery Left on AirPods

AirPods, like other products, might malfunction if their charge runs out. When I say “too low,” I mean less than 10% battery level. When your AirPods’ battery is low, they get little to no signal from the device to which they are attached. Furthermore, the power level of the AirPods decreases. As a result, you should not anticipate great connections and performance from them.

On the linked device, you can check the battery level of your AirPods. Look for the AirPods symbol in your device’s notification bar, and the battery level will get shown next to it.

Depending on your phone’s settings, the battery level may seem red. Alternatively, check the drop-down menu on your device.

Here are some potential signs that your AirPods’ battery is running low:

  1. The connection is erratic.
  2. The volume level automatically decreases.
  3. Earbuds may be turned on or off from either side.

The Fix:

There is no other way to address this issue but to recharge your AirPods.

There are two methods to go about it:

  1. Charge them using the charging case.
  2. By inserting the charging case and inserting the case into a power outlet, AirPods charge quickly.

So don’t be concerned! Because you can use your AirPods after just a few minutes of charging. You can charge your AirPods for at least 10 minutes if you use the charging case. And get access to hours of playback time.

However, if you want to use your AirPods for an extended period, swap them every at least 30 minutes. It charges your smartphone completely. As a result, you will be able to utilize it indefinitely.

10. Modified Equalifier Settings

Are you acquainted with an audio equalizer, often known as an EQ? ‘Sound Check,’ perhaps? Did you realize that these audio settings contribute to the softer sound of your AirPods? EQ automatically adjusts the audio settings to monitor the frequency. Furthermore, it facilitates the dynamic interplay of the music parts.

Technically, this makes music more balanced and pleasing to the hearing. However, it may occasionally cause the loudness to be reduced as well. In addition to EQ, Apple devices contain a “Sound Check” option. After each song, this function automatically changes the volume level.

As a result, users’ hearing will not be harmed if the following audio has a high pitch or loudness level. These elements contribute to a more enjoyable and balanced listening or streaming experience. However, it may cause your AirPods to become quieter than usual.

The Fix:

Check to see whether these features are enabled. If so, switch them off right away.

Here’s how to disable the iPhone’s EQ and Sound Check:

  1. Navigate to the iPhone’s settings.
  2. Choose “Music.”
  3. Turn “Sound Check” off.
  4. From the same page, choose “EQ.”
  5. Then, deactivate the “EQ” button.
  6. After that, you should be able to hear your AirPods at a higher volume level.

If not, try disabling additional audio options, such as “Booster.”

Warning: Even if the “Sound Check” option is switched off, keep an eye on your volume level. Abrupt loud noise may harm your hearing.

11. Bluetooth Issues

In rare circumstances, AirPods may become noisier due to connectivity issues. Bluetooth connection failures or glitches are often caused by:

  1. Bugs in software.
  2. Out-of-range device
  3. Interference with the connection.
  4. When your Bluetooth connection is broken, the audio on your AirPods may become erratic.

Alternatively, the volume might get reduced. “How does Bluetooth connection interference work?” Connection interference occurs when other frequencies break a connection in the same band. The majority of gadgets operate on 2.4 GHz bands. And, sometimes, devices with the same band collide. And cause the connections to be momentarily disconnected.

The Fix:

Any potential connection difficulties get resolved by repairing your AirPods with the linked device.

So, if you run into this issue, unpair and fix your Apple devices.

Here’s how you can go about it:

  1. Navigate to the device’s settings.
  2. Choose “Bluetooth.”
  3. Tap the circular I symbol next to the name of your AirPods.
  4. Choose “Forget This Device.”
  5. Once, turn off and on your Bluetooth.
  6. Wait for your AirPods to show under “Available Devices.”
  7. Choose your AirPods.
  8. Then press the “Connect” button.

It should remedy any loudness problems with your AirPods. If not, repeat the method many times. Assume the situation persists. Try the other problem solutions listed above. Also, while using AirPods, keep your smartphone close to them. Remove any other gadgets that may interfere with the Bluetooth connection. You may notice minor latencies or malfunctions when you listen to music with your AirPods.

12. Both AirPods Don’t Have The Same Volume

If the volume on both AirPods is not balanced, your AirPods may look quieter. Users of Apple devices may regulate the volume of external devices through a setting. You may use them to make the left bud’s loudness louder than the bud’s volume—alternatively, vice versa.

Yes, it’s a fantastic feature.

However, it may make your AirPods look quieter despite the volume being turned up to eleven. If you’re not familiar with this function, you could believe the other pair is broken. And ultimately, you’ll receive new AirPods since your device isn’t functioning anymore.

You’re probably aware of how costly AirPods can be. As a result, you may not wish to acquire a new one due to this easy error. “However, I didn’t do anything after connecting my AirPods with my second device…” If that’s the case, you may have previously modified this setting. And then I forgot to reset it. Or you may have adjusted the slider by mistake when browsing your device’s settings. Regardless, you must balance the volume level to address this issue.

The Solution:

You can only adjust the volume of your connected device.

Get your iPhone or iPad, and then follow these easy steps:

  1. Navigate to the device’s settings.
  2. Choose “Accessibility.”
  3. Select “Hearing.”
  4. Select “Audio/Visual.”
  5. Then, move the slider to the center of the bar.

After that, your AirPods should be playing at the same volume.

13. Your AirPods are Damaged by Water

Because the hardware in your AirPods has been broken, they are silent. The AirPods include a circuit board and a motherboard. A circuit board (PCB) guarantees that electricity flows through all of the device’s electrical components.

If it is destroyed, your AirPods will no longer be able to store power charges. Similarly, the motherboard is in charge of connecting all of the hardware. When one component fails, the whole system may fail. You will also no longer be able to use your AirPods.

Many factors may contribute to the failure of the circuit board and motherboard, including:

  • Overheating.
  • Surges in power.
  • Damage caused by water.
  • Physical repercussions

Expect your AirPods to malfunction if any of these events occur. Alternatively, you may cease working entirely.

The Fix:

You may bring your AirPods to a service facility to preserve them. Request that an electronic specialist examine your gadget. Also, repair any potential damage to the circuit board or motherboard.

However, the charge for this might be relatively high. As a result, the best remedy to this issue is to purchase a new set of AirPods. Or an AirPods Pro for improved listening and longer battery life.

Sure, they’re pricey.

However, getting a new pair will save you more money, time, and effort than having them repaired at a service facility.

14. Batteries Are Low

If your AirPods are entirely dead, no audio will get played. So, before you attempt to utilize the pods, make sure they have some battery life remaining in them! Also, check sure your AirPods case is correctly charged and has enough power to charge your AirPods.

It’s difficult to determine when the AirPods battery will expire since they usually last a few hours, depending on how you use them. It is also normal for one AirPod’s battery to be depleted before the other. It is very typical!

If a pair of AirPods is almost dead (the batteries are less than 5% charged), they may begin to operate strangely. The connection may be sporadic; one or both ears may randomly go in and out, becoming painfully silent.

The Fix Charge your AirPods! Apple AirPods charge very quickly, providing more than an hour of listening time after just 10 minutes in the charging case. They may be ultimately charged in as little as 30 minutes!

Conclusion

You’re not alone in asking why your AirPods are so silent. The most frequent cause of volume reduction in Apple AirPods is a buildup of earwax and debris on the speakers.

Other factors, such as your iPhone’s volume restriction or Low Power Mode, might also be to fault. So, keep your ears and AirPods clean, and always check your phone’s settings before assuming your pricey wireless earbuds malfunction.

Have your AirPods become quieter? Have you found a solution to the low volume problem? What was the solution that worked best for you?

David Johnson is a freelance writer with 9 years of experience writing for Techzillo and other established tech outlets like iMore. His focus and key interests are Apple and accessibility as well as consumer technology in general. Read our Editorial Guidlines and Fact Checking process.

LEAVE A REPLY

Please enter your comment!
Please enter your name here