Samsung TV Blurry? Try These 17 Fixes

0
Samsung TV Blurry

Samsung TVs are known for their crystal clear picture and clean 4k display. However, from time to time, you might experience a blurry or fuzzy picture on your Samsung tv and it can be frustrating since it’s meant to be giving you the best picture quality.

Your Samsung tv has a fuzzy or blurry picture because the picture settings are wrong which has caused it to stretch. If the picture size is too zoomed in, it can cause the screen to appear blurry.

This can easily be changed by correcting the tv’s resolution and picture size and making sure that it fits the screen properly.

If your tv screen has a blurry image and you’re not sure why it’s happened, then don’t fear because there are a ton of reasons why and they can all easily be fixed. There are several troubleshooting steps you can take when this happens so don’t fear if it’s happened to you.

Why is My Samsung TV Blurry?

A fuzzy image on a high-definition LCD television is often the consequence of a mismatch between the resolution capabilities of the TV and the resolution of the signal originating from connected devices.

Several factors, such as inclement weather, might also contribute to the inaccurate display of pictures on your HD LCD TV. For example, suppose a storm cell moves into your region when viewing satellite TV programming.

The storm cell may interfere with the transmission, causing the program to show incorrectly on your television screen.

In addition, accumulating snow on your satellite dish might result in these sorts of issues, which can present themselves in various ways, including pixelated and blurred images.

1. Picture Settings Have Changed And Caused it to Stretch

Picture Size is sometimes referred to by other names, such as Zoom, Wide, Aspect Ratio, or even Picture. Check the settings menu on your television for anything that sounds like one of those words.

If you’re unsure if you’ve made the appropriate choice, scroll through the list of potential alternatives and look for the Zoom option.

Even if you have a brand new television, it is conceivable that it has not been set up correctly to provide the best possible picture. It is thus worthwhile to scroll through the options menu to ensure that everything is in working order.

Picture size is a setting that appears under many various names on different televisions, but it does the same thing. When the aspect ratio is incorrect, the picture must be extended or cropped to be seen.

The television can also trim the edge of the photo to make it more suitable for broadcast formats. It is necessary to adjust the picture size if this takes place. Once you fix the stretched setting, your picture will be fixed.

2. There’s A Bug

Depending on what you’re watching, this problem might get caused by either the television or the signal source. A smart TV might develop a bug.

The majority of us are unaware that our smart TVs around the house are just as susceptible to bugs as our phones and computers are to bugs.

To fix this, you’ll need to look for a firmware update.

After a firmware update is completed, the system will erase the bug and the code replaced by the update.

If your tv has a bug, you might see minor glitches and changes in picture quality. If you have tried changing the setting, you might need to get in touch with Samsung or have someone come and look at your tv.

3. The Show Itself Was Filmed With A Low-Resolution Camera

If you haven’t explored the menu options on your television, you might be dealing with oddities that you didn’t even realize you could fix.

In many cases, the default settings on many televisions do not provide the finest image quality, especially when you consider that each video source is likely to have its optimum settings that should be used.

When you watch a film filmed with a low-resolution camera, you will experience blurry picture quality.

The greater the size of a camera’s sensor, the greater the size of its photosites. The greater the number of megapixels that result, the better image and the higher the resolution.

4. Bad HDMI Cable

A defective HDMI cable can sometimes be the source of a pixelated or fuzzy television screen. Check if changing the HDMI cables can help address the problem.

Please keep in mind that using HDMI cables, which Samsung also manufactures, will be your best option.

Additionally, we should point out that if you are experiencing a tiny issue, you can try disconnecting and replugging the same HDMI connection. You might want to give it a shot first before investing in a new one.

5. Tv Settings Zoomed In

When the tv settings are zoomed in, you will have a blurry picture. When high-definition streaming is enabled, the zoom function is turned off as a precaution.

If this is not the case, it is possible to quickly change the zoom levels in your Picture settings using the remote. Because it is pretty rare for your Samsung device to zoom in and out continuously, you should investigate whether your television or a connected device is the source of the problem.

The Picture Test displays a high-resolution image that you can use to check for flaws or other issues. If your television is constantly zooming in, follow these steps to determine why:

1. Navigate to the Configuration section.

2. Navigate to the Help menu.

3. Select Self-Diagnosis from the drop-down menu.

4. To begin the image testing, press the button.

5. Check for problems in the image that show and follow the letter’s on-screen instructions.

6. The Set-Top Box Has the Wrong Resolution

If the resolution of your set-top box is incorrect, it might result in a hazy image on your television. Make sure you’re using a projector with an output resolution that matches the resolution of your TV screen. To fix the resolution of your set-top box:

1. Press the MENU button on the remote control for your set-top box.

2. Choose SETTINGS by pressing the RIGHT ARROW button twice on the horizontal menu bar.

3. Then, go down to SELECT SCREEN ASPECT RATIO AND HIGH DEFINITION, which you can be by selecting SYSTEM OPTIONS. To proceed, hit the OK button.

4. To choose the screen aspect ratio and the high definition setting, select them and then hit OK.

5. Select the appropriate aspect ratio and resolution, and then hit the OK button to finish.

7. Poor Internet Connection

If you have a poor internet connection, your Samsung picture can appear blurry. If you do have a poor internet connection due to wifi problems, then your Samsung Smart TV will lower the quality of your picture.

If your internet connection is weak, you’ll notice that your screen can start to appear fuzzy for a while. To double-check this, you can check if your internet is working properly on your phone and if you notice it’s not, you can put the blurriness down to poor WIFI speed.

It’s always important to remember to watch your smart tv on a strong WIFI connection. Before you do so, make sure to check your internet speed and if it’s low, expect a bad picture quality.

8. Bad Weather

This happens rarely, but bad weather can cause your Samsung TV to display pictures improperly.

For example, if there’s stormy weather in your area while you’re watching Netflix for example, then storm cells can interfere with the transmission and this can cause issues with the screen.

If you have an external satellite dish, snow might accumulate which can cause all sorts of problems that can be manifested in a blurry picture.

If you notice any accumulation of snow or debris on your satellite dish, or if there’s a storm, you need to wait for it to pass and see if the blurry screen corrects itself on your Samsung TV.

9. Watching Low Res Content

If you’re watching low-res content on your Samsung 4k screen, then it’ll appear blurry purely because the 1080p resolution content is too low for the high-end 4K TV.

If you don’t want your screen to appear blurry, you’ll need to change the 1080p resolution to 4k. For example, if you’re watching YouTube, then you’ll need to change the resolution of what you’re watching to improve the quality.

How to Fix Samsung TV Blurry Screen

A fuzzy image on a Samsung TV might be caused by an internal mistake, a change in your settings, or a device connected to it with an improper resolution for the Samsung TV. You can perform a soft reset to see whether the problem is only a small one.

If it doesn’t work, you’ll want to double-check your connections and any other devices that are connected to your television. If it’s still not functioning, you can go into the TV’s settings and manually reset the picture on your television.

1. Quick Fixes

1. Disconnect and reconnect all your cables. A common cause of a blurry screen or any damage on your Samsung tv screen is a faulty or corroded connection.

It’s common for corrosion to happen in extreme climates where the temperature swings a lot and where there’s always a high level of humidity. To try and fix this, you’ll need to remove all connections on your TV and reconnect them.

2. Once you’ve connected everything, if your screen is still blurry, you need to tap the back of the TV. If you tap the back of the tv and the fuzziness doesn’t go away, there’s likely an internal issue that’s causing the blur. Giving it a tap will fix the blurring temporarily, but it’s likely to return.

If the problem is still persisting, you have two options. You can try and fix the internal connections on the back.

However, you need to be aware that if your Samsung TV is still under warranty, this is likely to void your warranty which means that Samsung isn’t going to help fix your blurry picture if that’s the case.

The second option is to contact Samsung for a fix. You’ll need to enter your Samsung TV information on the Samsung website, then you have the option to message them through their messaging system, call them, or request service so that they’ll fix your blurry screen.

2. Change the TV’s Aspect Ratio to Ensure its Proper Aspect Ratio, Screen Fit, and Position

Zoom options available on the television might make the image seem stretched and unclear.

If you make a mistake and modify these settings, you should be able to go back in and repair them quite quickly. By accidentally resting your hand on the remote or attempting to alter other settings, you might easily cause this incident.

If you don’t want to fiddle with any of these options, you can always return the television to its factory default settings. We’ll detail this in the following section, but suffice to say that it will also restore the picture settings to their standard defaults.

To change the tv aspect ratio:

1. Go to Settings from the smart hub

2. Choose “Picture” from the drop-down menu.

3. Choose Picture Mode. This will make sure your television has the proper aspect ratio (16:9), screen fit, and position.

4. Your picture should no longer be blurry

3. Reset Picture on TV

You can reset the image on your television by going into the settings menu. It is similar to a factory reset, except that it only applies to the picture on the television. To reset the image on your Samsung TV, follow the instructions outlined below:

1. Navigate to the settings menu.

2. Choose “Picture” from the drop-down menu.

3. Select “expert settings” from the drop-down menu after scrolling down.

4. Select “Reset picture” from the drop-down menu.

The picture on your television has likely been entirely reset, and it should appear to be as clear as it was when you first got it.

4. Change Picture Size

If there’s a problem with the picture size:

1. Press the home button on your Samsung.

2. Select Settings.

3. Picture Size Settings.

4. Select the Picture Size you want.

If you select Custom, you can change the Zoom and Position of the picture as well. After you’ve corrected the picture size, you should notice that the picture size is no longer blurry.

5. Turn Tv off/on

Troubleshooting your tv is as easy as it sounds: switch it off and then back on again and again. Hold down the power button for around three minutes while the TV is turned off. Hopefully, this will work, but it is better to rule it out from the outset of the process, even if it does not.

6. Change Programs

Several distinct channels transmit at various resolutions. The causes for this might vary and include things like spectrum availability and the information displayed.

Sometimes the resolution issue is not your tv. Because different programs are shot with different resolutions, this can affect picture quality from program to program.

If you change programs and your picture quality gets better, it’s safe to say that the program you were watching is the issue, not your tv.

7. Fix Your Internet Connection

A high amount of movement or action in the content of the streaming video can result in a blurry or jumpy picture.

High Internet traffic or a slow Internet connection speed can also cause blurry video. Any of a few adjustments can eliminate blurriness and improve the overall quality of streaming video.

If your internet connection is bad, it can cause problems with the picture which can include fuzziness or blurring. This is especially when there’s a high amount of movement or action in the streaming of the video.

Any improvement on the internet connection can get rid of the blurriness and improve the quality of whatever you’re streaming.

8. Turn On Motion Blur

Motion smoothing features on your Samsung TV get rid of blurring or ghosting effects that come from fast-moving images. On Samsung TVs, these are known as Auto Motion Plus or Picture Clarity.

These motion smoothing settings look great on live tvs, like sporting events or parades, which are filmed at 30 frames per second. If your picture is blurry when you’re streaming, it might be because these settings are turned off.

Change Motion smoothing settings on your TV Navigate to Settings > Picture > Expert Settings > Auto Motion Plus Settings (Picture Clarity Settings). The default setting is Auto. Select Auto Motion Plus (Picture Clarity) to change the setting to On if off.

9. Unplug and Plugin TV

Samsung televisions are renowned for producing a sharp, crystal clear image and a visually appealing display. As a result, it can be pretty alarming when a person suddenly appears to have a hazy picture.

If your TV has a hazy picture and you’re unsure what to do, unplug the tv. Unplugging your tv is similar to performing a soft reset. If the picture quality does not change after the soft reset, you can look into your settings or call professionals.

10. Use a Set Top Box With the Right Resolution

If the set-top box you’re using to operate your TV on has the wrong resolution, it can cause a blurry image on your TV. You need to make sure that you’re using a box that’s output is the same resolution as your TV screen which is 4k for Samsung Smart TVs.

11. Perform a Picture Test

If the blurriness you’re experiencing is constant, you can perform a picture test. A picture test will check the internet components and connections of your Samsung tv and let you know what the problem you’re experiencing is. This will let you know whether you update your firmware, try your connections, or make a service repair appointment.

12. Update the Firmware on Your Samsung TV

If the firmware on your Samsung TV isn’t up to date, it can cause problems including a blurry tv screen. You need to try and update your TV then look at the picture. If your Samsung tv isn’t detecting a wireless network after you change the connection, you’ll need to update the firmware.

Like most operating system companies, Samsung releases a firmware update regularly for their TVs. If there’s a pending firmware update for your TV, you’re more likely to get bugs like network glitches which can affect your tv picture.

To download the Samsung TV firmware:

1. Go to the Samsung Download Center on your computer.

2. Search your TV’s Model Number

3. Locate your model’s firmware file on the support page

4. Download it. The downloaded firmware file will be in the form of a zipped file. After unzipping it, copy it into a USB flash drive.

To install the new updates on your Samsung Smart TV:

1. Connect the USB drive to your set

2. Go to TV’S settings

3. Click “Software Update.”

4. Select the “Update Now” option

The TV will automatically search firmware update files on your USB drive files. Follow all the on-screen instructions to complete the process.

Your TV will now start to search for firmware update files on your USB drive automatically. Once the search is complete, the Smart TV will automatically restart.

Once it’s finished updating, you can check the picture to see if it’s improved now that your network has improved.

13. Reset Network Settings

And in a smart TV, if you can’t connect to the internet, then you are missing out on so much.

If there’s a problem with your network that’s not allowing your TV to connect to the internet properly, then it could cause the picture to be blurry. You can reset your Samsung TV by resettings the Smart Hub.

1. Launch Smart Hub.

2. Go to Tools > Settings > Reset.

3. The TV will ask you for a password. If you didn’t create one, enter the default password 0000.

Factory resetting your TV will also reset your network settings but you want to make sure that you reset your network settings before you try and reset your TV.

Resetting your network settings wipes all current settings on your TV set, which will leave the settings that it came with when it left the factory. This can help fix blurring if you changed a setting that caused your TV to become blurry in the first place.

14. Reset Samsung Smart tv

Resetting your Samsung Smart TV might get rid of any bugs or glitches within the software that are causing the picture to go blurry or become fuzzy. Sometimes bugs can cause unexpected errors and the best way to get rid of them is to restart your Samsung TV.

1. Go to the Home screen.

2. Go to settings > General.

3. Scroll down and select Reset Samsung Smart tv.

4. Enter your 4 digit pin and confirm resetting the Samsung tv.

Once the reset process is done, your Samsung tv will be back to factory default and the original settings will remain. You should now check the picture to see if the picture quality is better.

15. Reduce Digital Noise Reduction

Turn off the digital noise reduction feature on your TV. If digital noise reduction is turned on, it’ll adjust the natural image of the picture displayed on the screen by changing lighting levels, sharpness and other visual properties. These changes in settings can mess with the picture quality and cause it be unclear.

To turn off digital noise from your Samsung TV screen, you’ll need to disable Digital Clean View in the settings.

1. Press the Menu key from the remote.

2. Select the Picture option and press Enter key.

3. Select Picture Options and press the Enter key.

4. Select Digital Clean View in Picture Options and press the Enter key. From here, you’ll see 6 options in Digital Clean View.

5. Select Off to turn off Digital Clean View. Turning this off can improve the picture quality and fix the blurriness your Samsung TV is experiencing.

16. Remove Electrical Appliances Nearby

If there are electrical devices near the TV, you need to remove them as they can interfere with the picture quality. These can be common household items like a laptop or phone and they can all be responsible for the blurry screen.

17. Reduce Glare

If there’s light coming from the windows, it can affect the picture quality. You need to turn off the lights in the room you’re viewing the TV and close the curtains. This will get rid of the glare and stop any blurring that’s affecting the picture quality.

David Johnson is a freelance writer with 9 years of experience writing for Techzillo and other established tech outlets like iMore. His focus and key interests are Apple and accessibility as well as consumer technology in general. Read our Editorial Guidlines and Fact Checking process.

LEAVE A REPLY

Please enter your comment!
Please enter your name here